Parkview Fabrications logo

Herne Bay

Herne Bay Public Realm & Council Metalwork

Call 07873 263431Get a Free Quote

Same day callback across Kent

Herne Bay has one of the longest continuous promenades on the north Kent coast, and that promenade is essentially a several mile long piece of public metalwork with a footpath attached. Canterbury City Council carries it, along with the parks, the seafront shelters, the Central Bandstand, the pier approach and the open spaces above the town, while Kent County Council covers the highways, schools and rights of way inland. Council metalwork in Herne Bay is therefore dominated by long exposed runs of guard rail and handrail, punctuated by structures with a Victorian and interwar character that deserve a repair rather than a replacement. Parkview Fabrications does that kind of work. The promenade rail from the Downs end through the town centre and out toward Beltinge takes constant weather, and the failures are predictable: posts corroding at the point where they enter the concrete, top rails opening at their joints, infill bars parting from their sockets. Rather than lift a whole run, Paul cuts back to sound metal, lets in a matching section and rebuilds the base fixing properly. The shelters and the bandstand area need a more careful hand again, matching original profiles and bracket detail so the repair does not shout. Where a section of Herne Bay's historic seafront furniture is beyond saving, a matching replacement is fabricated rather than a modern equivalent substituted. The pier approach, the sailing club frontage and the slipways add ladders, chain runs and handrail to gradients that get splashed regularly. Inland, Herne Bay generates the standard council list: entrance and service gates at Memorial Park and the Downs, boundary railings, seat and bin frames, cycle stands, goal sockets, play area metalwork and sports court fencing repairs. The town centre around Mortimer Street and William Street needs bollards and pedestrian guard rail that take delivery traffic. Housing land needs communal gates, bike store frames, stair balustrades and ramp handrails to the loading the authority specifies. Schools need line gates and secure boundary work. Finish is the recurring technical decision. On the Herne Bay frontage a galvanised finish with a paint system on top is the usual answer, but the detailing matters as much as the coating, because water sitting inside a section will destroy it from the inside regardless of what is on the outside. Paul designs for drainage and says honestly when stainless or aluminium is the better long term choice for a particular position. Access is agreed rather than assumed. Promenade and town centre work in Herne Bay is easier early, late or out of season, and Parkview Fabrications writes that window into the scope. Herne Bay council metalwork enquiries can be sent to parkviewfabs@gmail.com or called through on 07873 263431 with a location, a photo and the ratings required.

Newly fabricated galvanised steel handrail and balustrade installed on public steps

More in Herne Bay

Local Authority & Council Metalwork in Herne Bay: FAQs

Common questions about local authority & council metalwork from Parkview Fabrications in Herne Bay.

Yes. Rather than lifting an entire run, Parkview Fabrications cuts back to sound metal, lets in a matching section and rebuilds the base fixing where a Herne Bay promenade post has corroded at the concrete line. That keeps cost down and keeps the appearance of the run consistent along the seafront.

Usually yes. Parkview Fabrications repairs frames, brackets and bench supports around the Herne Bay shelters and the Central Bandstand, matching original profiles so a repair does not shout. Where a section genuinely cannot be saved, a matching piece is fabricated rather than a modern equivalent being substituted into a historic structure.

Canterbury City Council covers Herne Bay's promenade, parks, shelters and open spaces, and Kent County Council covers highways, schools and rights of way. Parkview Fabrications works for either, and for the contractors acting on their behalf, taking the written specification from whichever body raises the order.

Galvanising with a paint system over it is the usual starting point, but Parkview Fabrications treats the detailing as equally important, because water trapped inside a section will destroy it whatever the coating. Paul will also say when stainless or aluminium is the better long term answer for a specific Herne Bay position.

Yes. Ladders, chain runs, handrail on gradients and access furniture around the Herne Bay slipways and pier approach are handled by Parkview Fabrications. These get splashed constantly, so material and fixing choices are made for that exposure rather than being lifted from a general specification.

Yes. Parkview Fabrications fabricates and installs entrance and service gates, boundary railings, seat and bin frames, cycle stands, goal sockets and play area metalwork across Memorial Park, the Downs and Herne Bay's smaller open spaces, dressing welds and trimming threads where the public and children are in close contact.

They can be built to. Parkview Fabrications specifies bollard section and root fixing for Herne Bay town centre streets based on the traffic they actually see, not a generic figure. Struck units are often repairable with a new stem on a sound base, which keeps the run consistent along Mortimer Street and William Street.

Yes. Sports court and multi use games area fencing, gates and goal metalwork on Herne Bay council sites are repaired and replaced by Parkview Fabrications. Damaged panels and posts are made safe on the first visit where possible, with the permanent repair quoted separately against a written scope of works.

Yes, and it usually should be. Parkview Fabrications programmes Herne Bay promenade and town centre metalwork for early mornings, evenings, midweek or out of season so a busy seafront is not obstructed. The access window is written into the scope of works and agreed with the authority in advance.

By agreeing a scope first. Parkview Fabrications surveys the asset or works from photographs and measurements, confirms the scope of works in writing and prices that scope as a fixed quote. Email parkviewfabs@gmail.com or ring 07873 263431 and Paul will confirm whether a Herne Bay site visit is needed.